LEPUS
LEPUSFAST SLIDING AUTOMATIC GATE OPENER
The LEPUSFAST is an industrial sliding gate operator with a high duty cycle and fast 27 metres per minute (adjustable) opening speed and fully adjustable closing speed.
240 VOLT SLIDING ELECTRIC GATE OPERATOR- COMMERCIAL / INDUSTRIAL - 1500KG
  • Reliability of Gearmotors in oil bath
  • All main parts are produced and tested in the SEA facilities
  • Robust, cataphoresis- treated polyester paint sheet housing for heavy-duty applications of industrial type
  • Manual release hidden behind a lid with key for max. security
  • START S12 control unit for all demanding functions
  • LEPUS BOX FAST with frequency variator for opening up to 450 mm/sec
  • PRICING
    LEPUSFAST -
    Motor complete with logic control board and base plate.
    $4320.00
    RACKSTEEL -
    One metre lengths of steel rack with adjustable fixing angle.
    $45.00
    SPECIFICATION
    Motor Voltage -
    3 Phase motor - Only 240 volt input required
    Current Standby -
    100mA
    Current at use -
    3.0A
    Motor power -
    450W
    Maximum thrust -
    70Nm
    Operating speed -
    27 metres per minute
    Maximum gate size -
    1500 kg
    Duty cycle -
    75%
    Height -
    407mm
    Width -
    395mm
    Depth -
    315mm
    Weight -
    35 Kg
    IP rating -
    IP55
    DOWNLOAD & MANUALS RESOURCE PAGE
    Use the QR Code below or click anywhere in this link to the Automatic Gates information page and resources for this product.
    LEPUS-D812M QR CODE
    OPTIONAL
    RACK - Most sliding gate systems require rack (There are a few chain drive operators for industrial gates). Available in steel reinfoced nylon for gates up to 800 kilograms and a larger galvanised steel version for heavier industrial gates. One metre lengths with easy fix points. Click to view.

    PHOTOCELLS - A must have if you use automatic closing function is photocells. Photocells provide an extra level of safety to prevent gates from closing on vehicles or pedestrians. Sliding gates can have a single set between the gate posts or multiple sets if desired at various heights. Click to view.

    MAINS POWER FILTER - Gate automation like this usually is installed on commercial and industrial sites where you can be pretty certain the mains power is less than desirable. Dirty power can result in lack of reliability and increased service costs. Installing a good quality filter will not only guard against spikes and surges but clean up the power before it reaches your electronics. There is more information here.