EASY GATE 018
EG018
Download a double gate specification sheet here.
Download a single gate specification sheet here.
PRODUCT OVERVIEW
Easy Gate 018 is similar to design 001 but it includes a decorative water jet cut insert feature. The decorative section can be installed at either end of the gate or with the addition of another mullion can be positioned anywhere in the gate centre with slats either side.It uses vertical 38mm slats with nominal 100mm spacing but this can be adjusted to anything you desire. Full colour range available with standard, custom and premium colours and of course you can have different frame colour to the infill colour.
CONSTRUCTION
Start with the Australian designed Easy Gate frame with 3mm wall thickness and fully welded corner stakes giving a total of 6mm wall thickness in all four corners. Add your slats secured by 50mm of main frame channel at your preffered spacing. These are then secured at each end in receiver channels using rivets or self drilling screws. Finally you pop on the concealed fixing cover for a nice neat finish.

WORK OUT A PRICE NOW
Step 1 - Select your gate style and design. Example: This design is Easy Gate 018
Step 2 - Enter the gate width and the gate height in millimetres and your slat spacing.
Step 3 - Choose any accessories you require.

(NOTES: The result assuming your sizes and entry is accurate should be pretty close but the more accurate way is to request a price through our gate department. Click the link below to fill in the quote request form.)

CLICK HERE TO OPEN A QUOTE REQUEST FORM.