EASY GATE 010
PRODUCT OVERVIEW
Easy Gate 010 is our frame only model ready for you infill. A trade favourite is to use mini orb insert. Transoms and mullions are also available if required. Full colour range available with standard, custom and premium colours.
Easy Gate 010 is our frame only model ready for you infill. A trade favourite is to use mini orb insert. Transoms and mullions are also available if required. Full colour range available with standard, custom and premium colours.
CONSTRUCTION
Start with the Australian designed Easy Gate frame with 3mm wall thickness and fully welded corner stakes giving a total of 6mm wall thickness in all four corners. Add your slats secured by 50mm of main frame channel at your preffered spacing. These are then secured at each end in receiver channels using rivets or self drilling screws. Finally you pop on the concealed fixing cover for a nice neat finish.
Start with the Australian designed Easy Gate frame with 3mm wall thickness and fully welded corner stakes giving a total of 6mm wall thickness in all four corners. Add your slats secured by 50mm of main frame channel at your preffered spacing. These are then secured at each end in receiver channels using rivets or self drilling screws. Finally you pop on the concealed fixing cover for a nice neat finish.
WORK OUT A PRICE NOW
Step 1 - Select your gate style and design. Example: This design is Easy Gate 010
Step 2 - Enter the gate width and the gate height in millimetres and your slat spacing.
Step 3 - Choose any accessories you require.
(NOTES: The result assuming your sizes and entry is accurate should be pretty close but the more accurate way is to request a price through our gate department. Click the link below to fill in the quote request form.)